双核三螺旋铁配合物的合成和结构

本文选择了2-羟基-1-萘醛与水合肼形成的席夫碱,[(HO)(C₁₀H₆)CH=N-N=CH(C₁₀H₆)(OH)],作为配体,设计组装了双核三螺旋的三价铁配合物。配合物中每一个铁离子以准八面体的配位方式分别与三个NO双齿单元配位, 三个配体分别桥联两个金属形成特定的三螺旋构型。分子内和分子间的π-π堆积作用对螺旋体的形成和堆积方式起着十分重要的作用。作为对照,本文还报道了配体的晶体结构。     

Nanoparticles: scaffolds for molecular recognition

Monolayer and mixed-monolayer protected clusters (MPCs and MMPCs) have great potential to combine molecular functionality with the intrinsic properties of nanometer-sized scaffolds. This synergy can be used to create complex functional devices, including redox-active, electronic, or magnetic storage devices, solution-based sensors, and highly efficient catalysts. This review outlines some of the recent developments in nanoscale receptors based on synthetic and nonbiological recognition elements. In these nanoparticle systems, molecular recognition is achieved by covalent attachment of receptors on the nanoparticles coupled with noncovalent interactions to target substrates. Synthetic host-guest systems, hydrogen bonding, change in redox states, pi-pi stacking, rotaxane formation, and ion recognition are the main topics covered in this review.     

Microfabricated ISEs: critical comparison of inherently conducting polymer and hydrogel based inner contacts

A rigorous side by side comparison of miniature planar potassium-selective electrodes with hydrogel and potassium hexacyanoferrate(II)/(III) doped polypyrrole (PPy/FeCN) based inner contacts is presented. The planar electrodes were manufactured by screen printing as four- and five-site arrays on ceramic substrates. These electrode arrays were incorporated into a flow-through cell, which could accommodate nine electrode sites. Two identical flow cells were connected in series and the effect of the inner contacts on the analytical performance of the respective electrodes has been critically evaluated. The time necessary to reach steady state conditions has been determined and the effect of experimental parameters (temperature, ambient light intensity, CO₂, and O₂ concentration of the sample) on the potential stability of the electrodes was analyzed. At controlled temperature, the drift of the planar potassium electrodes with hydrogel and PPy/FeCN solid contact were 0.11±0.02 mV h⁻¹ and 0.03±0.007 mV h⁻¹, respectively. The experimental data proved that there is no aqueous film formation between the PPy/FeCN film and the potassium-selective solvent polymeric membrane.     

Fluoropolyethers end‐capped by polar functional groups. IV. A novel approach to the evaluation of reactivities of hydroxy‐terminated ethoxylated fluoropolyethers in the tin(IV)‐catalyzed reactions with isophorone diisocyanate

The effect of catalyst dibutyltin dilaurate (DBTDL) on the kinetics of urethane formation reactions of α,ω‐bis(hydroxy)‐terminated fluoropolyethers Fomblin® Z‐DOL TXs (FPEs) of various molecular weights and poly(oxyethylene) glycol PEG‐400 with isophorone diisocyanate (IPDI) in hexafluoroxylene (HFX) and tetrahydrofuran (THF) at 40 °C and NCO:OH = 2:1 have been studied in a broad range of catalyst (0.10–9.00) ×10^?4 M and total reagents (10.0–60.1 wt %) concentrations. The rate of tin‐catalyzed second‐order reactions (with respect to diol and diisocyanate) was found to be proportional to the square root of catalyst concentration [DBTDL]^0.5 both in low polar (HFX) and polar (THF) solvents. Effect of catalyst saturation was revealed for all the reaction systems at higher DBTDL concentrations as well as the appearance of the limiting catalyst concentrations C_lim below which the rates of reaction were close to zero. Based on these findings new effective rate coefficients have been derived k = k_cat/(C ? C) that are independent of the total reagent concentration in the range of 10.0–60.1 wt % ([OH] = 0.10–0.91 equiv/L). This new approach highlights that the rate of the tin‐catalyzed urethane formation reactions of α,ω‐bis(hydroxy)‐terminated fluoropolyethers Z‐DOL TXs with IPDI in HFX at 40 °C and NCO:OH = 2:1 increases significantly with increasing MW of FPE from 776 up to 3405. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5354–5371, 2004     

基于荧光效应的小分子抗癌药物释放体系研究进展

近年来,随着癌症发病率的不断升高,癌症治疗技术的更新和发展显得尤为重要,特别是化学疗法(Chemotherapy)的提出促进了荧光小分子抗癌药物释放体系的研究。 将具有荧光效应的有机小分子与抗癌药物结合在一起,使得药物释放体系表现出低毒性、优异的癌细胞靶向性和方便药物跟踪监测等特点。 因此,设计不同性能的前药可以研究抗癌药物释放的动力学过程,为实现癌症的精准治疗提供有力的工具。 本文主要介绍了基于喜树碱、SN-38和阿霉素等前药的研究进展,并对其发展前景作了展望。     

海泡石制备HMS和AlSBA介孔分子筛的研究

通过酸浸和模板合成处理，海泡石直接合成有序介孔二氧化硅和含铝的介孔二氧化硅. 海泡石用盐酸处理后120 ℃下在NaOH溶液中处理72 h, 得到具有HMS结构特征的介孔分子筛；在含铝的碱性溶液中处理后得到具有AlSBA结构的介孔分子筛. 并用SAXRD、BET、TPD表征了介孔分子筛的物相结构、比表面积、孔径分布和表面酸性. 两种介孔分子筛的比表面积分别为508 m2•g^-1和946 m2•g^-1，孔径分别为3.4 nm和3.9 nm，且孔径分布窄. NH3-TPD结果表明分子筛表面都有两个酸中心，随着Al原子的引入，表面酸性增强.     

On the use of local basis sets for localized molecular orbitals

Two procedures are discussed for the direct variational optimization of localized molecular orbitals which are expanded in local subsets of the molecular basis set. It is shown that a Newton-Raphson approach is more efficient than an iterative diagonalization scheme. The effect of the basis-set truncation on the quality ofab-initio SCF results is investigated for Be, Li₂, HF, H₂O, NH₃, CH₄ and C₂H₆.     

Structure of palladium quinoline-8-selenolate Pd(C9H6NSe)2

The molecular and crystal structure of palladium quinoline-8-selenolate Pd(C₉H₆NSe)₂ has been determined by X-ray structural analysis. The structures of the five-membered metallocycles of palladium 8-hydroxy-, 8-mercapto-, and 8-hydroselenoquinolinates of one type are compared. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 396–402, March, 2006.     

气相渗透法中的溶质吸附效应

在气相渗透仪上，用四个低分子量有机化合物和五个已知平均分子量的窄分布聚苯乙烯低聚体，对ＶＰＯ方法中的溶质吸附效应作了研究，提出了一种对吸附效应作改正的方法．所得结果表明，在扣除溶质吸附效应后，仪器常数Ｋ无分子量依赖性，提高了测定低分子量聚合物数均分子量的准确性．     

一种新的滤纸基质固体表面低温荧光(燐光)测定装置

对自行研制的铜制滤纸基质低温荧光（燐光）测定的样品支架，进行了滤纸基质固体表面低温荧光测定的可行性研究。与同类冷冻装置和室温装置比较，本装置用于滤纸基质固体表面低温荧光（燐光）测定具有以下优点；样品的分析周期大大地缩短，由45min缩短为5-6min；装置简单、便宜耐用；操作简便，简化了室温测定时的滤纸干燥程序，应用范围广，方法的重现性好，检样分析结果的相对标准偏差RSD%小于10%，荧光（燐光）分析灵敏度高，检出限低，线性范围宽。